Audio-Technica ATW1312/831cw System 10 PRO
UniPak/ Handheld Combo System(2.4 GHz)
ชุดไมโครโฟนไร้สายแบบหนีบปกและแบบมือถือชนิดคู่ ATW1312/AT831cw System 10 PRO ประกอบด้วย
Rack-Mount ATW-RC13 receiver chassis 1 ชุด,
เครื่องรับสัญญาณ ATW-RU13 receiver unit 2ตัว,
เครื่องส่งสัญญาณ ATW-T1001 UniPak® transmitter 1 ตัว
ไมโครโฟนมือถือ ATW-T1002 Handheld Microphone/Transmitter 1ตัว
ไมโครโฟนแบบหนีบ AT831cW Mini Cardioid Condenser Mic 1 ตัว
The System 10 PRO ATW-1312 from Audio-Technica is a digital 24-bit/48 kHz wireless microphone system that operates on the 2.4 GHz ISM band and is used to capture audio for applications such as live stage, theater, DJ setups, and more.
The System 10 PRO features a half-rack chassis that allows you to mount one or two receiver units, however the receiver units can be released from the chassis and mounted remotely (up to 328′ away) via Ethernet cable. Up to five chassis or 10 receiver units can be linked using a RJ12 cable, creating a multi-channel system with up to 10 channels.
In addition, other features include an easy-to-read display on each transmitter and receiver unit for quick setup, clear and natural-quality sound, and three levels of diversity, namely frequency, time, and space. Frequency Diversity sends the signal on two allocated frequencies, Time Diversity sends the signal in multiple time slots, and Space Diversity uses two antennas on each transmitter and receiver unit, thus to help maximize signal integrity.
The System 10 PRO Rack-Mount system includes one ATW-RC13 receiver chassis with rack-mount adapters, two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, one RJ12 cable, one AC adapter, one ATW-T1001 bodypack transmitter, and one ATW-T1002 handheld dynamic microphone.
Digital 24-bit/48 kHz Operation
2.4 GHz ISM Band
Automatic Frequency Selection
XLR and 1/4″ Outputs
Channel Selection, Sync, and Setup
Three Levels of Diversity Assurance
Easy-To-Read Display
Can be Linked to Ten Receiver Units
Receiver Units Can Be Mounted Remotely
Ground-Lift Switch
Specifications
ATW-RC13 System 10 PRO Rack-Mount Digital Wireless Receiver (2.4 GHz)
|
Operating Frequencies | 2.4 GHz ISM band |
Dynamic Range | >109 dB (A-weighted), typical |
Total Harmonic Distortion (THD) | <0.05% typical |
Operating Range | 200 (60 m) open range environment with no interfering signals |
Operating Temperature Range | 32 to 104°F (0 to 40°C) battery performance may be reduced at very low temperatures |
Frequency Response | 20 Hz to 20 kHz (depending on microphone type) |
|
Receiving System | Diversity (frequency/time/space) |
Output Connectors | Remote Receiver Connector: RJ45 Link Connector: RJ12 |
Maximum Output Level | XLR Balanced: 0 dBV 1/4 (6.3 mm) Unbalanced: +6 dBV |
Power Supply | 100-240 VAC (50/60 Hz) to 12 VDC 0.5 A power supply switched mode external |
Dimensions (W x H x D) | 8.26 x 1.73 x 6.67 (209.8 x 44 x 169.3 mm) |
Weight | 33.2 oz (940 g) |
ATW-RU13 System 10 PRO Receiver Unit (2.4 GHz)
|
Operating Frequencies | 2.4 GHz ISM band |
Dynamic Range | >109 dB (A-weighted), typical |
Total Harmonic Distortion (THD) | <0.05% typical |
Operating Range | 200 (60 m) open range environment with no interfering signals |
Operating Temperature Range | 32 to 104°F (0 to 40°C) battery performance may be reduced at very low temperatures |
Frequency Response | 20 Hz to 20 kHz (depending on microphone type) |
Audio Sampling | 24-bit/ 48 kHz |
Latency | 3.8 ms |
|
Receiving System | Diversity (frequency/time/space) |
Remote Receiver Connector | RJ45 |
Mounting Thread | 1/4 x 20 |
Dimensions (W x H x D) | 2.24 x 0.75 x 3.06 (57 x 19 x 77.6 mm) |
Weight | 2.3 oz (64 g) |
|
Package Weight | 0.45 lb |
Box Dimensions (LxWxH) | 5.8 x 4.3 x 3.4 |
ATW-T1001 System 10 Digital UniPak Transmitter
Operating Frequency | 2.4 GHz ISM band |
Dynamic Range | > 109 dB (A-weighted), typical |
Total Harmonic Distortion | < 0.05% typical |
Operating Range | 100 (30 m) typical |
Frequency Response | 20 Hz to 20 kHz |
Audio Sampling | 24 bit / 48 kHz |
RF Output Power | 10 mW |
Spurious Emission | Following federal and national regulations |
Input Connections | Four-pin Locking Connector: Pin 1 GND, Pin 2 INST INPUT, Pin 3 MIC INPUT, Pin 4 DC BIAS 9 V |
Battery Requirement | Two 1.5 V AA (not included) |
Battery Life | > 7 hours (alkaline) |
Operating Temperature Range | 32 to 104°F (0 to 40°C) |
Dimensions (W x H x D) | 2.76 x 4.21 x 0.98 (70.20 x 107.00 x 24.9 mm) |
Weight | 3.5 oz (100 g) |
|
Package Weight | 0.35 lb |
Box Dimensions (LxWxH) | 5.7 x 3.4 x 2.4 |
ATW-T1002 Handheld Unidirectional Microphone/Transmitter
Operating Frequency | 2.4 GHz ISM band |
Dynamic Range | > 109 dB (A-weighted), typical |
Total Harmonic Distortion | < 0.05% typical |
Operating Range | 100 (30 m) typical |
Frequency Response | 20 Hz to 20 kHz |
Audio Sampling | 24 bit / 48 kHz |
RF Output Power | 10 mW |
Spurious Emission | Following federal and national regulations |
Battery Requirement | Two 1.5 V AA (not included) |
Battery Life | > 7 hours (alkaline) |
Operating Temperature | 32 to 104°F (0 to 40°C) |
Dimensions (LxDiameter) | 10.03 x 1.97 (254.8 x 50.0 mm) |
Weight | 9.9 oz (280 g) |
|
Package Weight | 0.9 lb |
Box Dimensions (LxWxH) | 12.7 x 2.9 x 2.8 |
AT831cW Mini Cardioid Condenser Mic
Transducer | Permanently Polarized Condenser |
Polar Pattern | Cardioid |
Frequency Response | 40Hz 20kHz |
Dynamic Range (Typical) | 101dB, (@ Maximum SPL) |
Signal-to-Noise Ratio | 65dB, (A-Weighted) |
Maximum Input Sound Level | 126dB, (@ 1kHz 1% THD) |
Power Requirements | Powered by the A-T UniPak Wireless Transmitters |
Output Impedance | 200 Ohms |
Output Connectors | 4-Pin HRS Connector for Connection to A-T UniPak Wireless Transmitters |
Pad | None |
Low Frequency Roll-Off | None |
Applications | Vocal, Instrument (Especially Guitar) |
Dimensions | Microphone: 0.98 x 0.39 (25 x 10mm) LxDiameter Cable: 55 (1.4m) Long |
Weight | 0.1oz (2.8g) Less Cable |
|
Package Weight | 0.2 lb |
Box Dimensions (LxWxH) | 7.0 x 4.0 x 1.5 |