Electro-Voice RE420

คุณสมบัติสินค้า:

ไมโครโฟนสาย แบบคอนเดนเซอร์

แบรนด์ : Electro-Voice

Share

Electro-Voice RE420 Condenser cardioid vocal microphone

The RE420 is a premium-grade, high-performance, condenser cardioid vocal microphone. Designed to reveal the exceptional detail and vivid clarity synonymous with condenser elements, it skillfully delivers the lyrical finesse required for expressive vocal performances.

The sonic signature is rich, detailed and full-bodied, with a warm and clear low end, natural and present midrange, and an open, crisp and detailed high end. The cardioid pattern provides excellent acoustic isolation. Maximum feedback rejection occurs when a stage monitor is positioned 180° off-axis to the element. This pattern also allows for a comfortable working range around the microphone making expressive microphone techniques easy.

The multi-stage pop filter consists of two layers of dense foam separated by air, which attenuates wind velocity caused by breath and windblasts. The high-pass filter has two positions (see drawing). The flat position delivers the full frequency band pass of the capsule. The high-pass position attenuates frequencies below 150 Hz.

The internal shock mount isolates the microphone element from vibration and guards against handling noise.
 

Feature.

  • Premium condenser element delivers a highlydetailed, rich, and full bodied sound
  • Cardioid polar pattern provides excellent acoustic isolation with a comfortable working range
  • Multi-stage pop filter minimizes breath blasts and plosives
  • Selectable high-pass filter reduces undesirable low frequency content when engaged
  • Vibration-absorbing internal shock mount minimizes handling noise

 

Specifications

Element typeSelf-biased condenser
Frequency response50 Hz-20 kHz
Polar patternCardioid

Specifications

Sensitivity, open circuitvoltage, 1 kHz5.6 mV/Pascal (-45 dBV/Pa)
Clipping (max SPL)149 dB SPL (1% THD)
Self noise22 dB SPL "A" weighed (0 dB=20 μPa)
Dynamic range127 dB
Signal-to-Noise ratio72 dB
Output impedance200 ohms
Power requirements48 VDC phantom power
PolarityPositive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
Electrical contact3-pin, XLR-type
FinishBlack polyurethane paint
MaterialsZinc die cast, steel wire cloth grille
Dimensions, length
diameter
shank
7.6 in. (192 mm)
1.95 in. (49.5 mm)
0.96 in. (24.3 mm)
Net weight11.5 oz (326 g)
Shipping weight1 lb 4.9 oz (593 g)

   Datasheet

สินค้าเกี่ยวข้อง

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้