ไมโครโฟนไร้สาย แบบมือถือและไมค์ลอยหนีบปกเสื้อ
หมวดหมู่ : สินค้าระบบเสียง ,  ไมโครโฟน ,  ไมโครโฟนไร้สาย , 
แบรนด์ : AUDIO-TECHNICA
Share
AUDIO-TECHNICA ATW-1312/829CW
The Audio-Technica “System 10 Pro” rack-mountable digital wireless system is so simple to use, so dependable and so automatic that you’ll never have to think about it. Set it up anywhere, turn it on and its good to go.
Like the rest of the range System 10, the System 10 Pro works in 24-bit / 48 kHz, and allows easy use while ensuring clear and natural sound quality. The system offers three levels of diversity: frequency, time and space. Frequency diversity sends the signal to two frequencies allocated for communication without interference. The time diversity sends the signal in several time slots to optimize immunity against multipath interference. Finally, space diversity uses two antennas on each transmitter and receiver to maximize signal integrity.
คุณสมบัติ
“2.4GHZ DIGITAL SYSTEM, 24 BITS/48 KHZ”
The System 10 continuously monitors the activity in the 2.4GHz band and automatically adjusts its own frequencies to avoid interference. Thus, this system works perfectly well in WiFi environments. Also ideal for add channels to an existing installation running on TV frequencies, since the System 10 Pro will not result in intermodulation or interference.
“THREE LEVELS OF DIVERSITY ASSURANCE”
The System 10 provides three levels of diversity: frequency, time and space. Frequency diversity sends the signal to two frequencies allocated for communication without interference. The time diversity sends the signal in several time slots to optimize immunity against multipath interference. Finally, space diversity uses two antennas on each transmitter and receiver to maximize signal integrity.
“A COMPACT AND EXPANDABLE SYSTEM”
With an RJ12 cable supplied with each system, it is possible to connect up to 5 frames (10 receivers). While many systems can operate without being connected, this is not recommended. Indeed, linking the systems to create a more stable environment in which receivers are coordinated for the reception, transmission and frequency allocation avoids signal loss and optimizes the simultaneous use of the 10 channels
Overall System | |
---|---|
Operating Frequencies | 2.4 GHz ISM band |
Frequency Response | 20 Hz to 20 kHz Depending on microphone type |
Operating Range | 60 m (200′) Open range env. with no interfering signals |
Dynamic Range | >109 dB (A-weighted), typical |
Total Harmonic Distortion | <0.05% typical |
Operating Temperature Range | 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures |
Audio Sampling | 24 bit / 48 kHz |
Latency | 3.8 ms |
Receiver | |
---|---|
Receiving System | Diversity (frequency/time/space) |
Output Connectors (Microphone) | Remote Receiver Connector: RJ45 Link Connector: RJ12 |
Maximum Output Level | XLR, balanced: 0 dBV 1/4″ (6.3 mm), unbalanced: +6 dBV |
Power Supply | 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external |
Dimensions | 209.8 mm (8.26″) W x 44 mm (1.73″) Hx 169.3 mm (6.67″) D |
Weight | 940g |
Accessories Included | Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet |
Handheld Transmitter | |
---|---|
RF Power Output | 10 mW |
Spurious Emissions | Following federal and national regulations |
Battery Type | Two 1.5V AA (not included) |
Battery Life | >7 hours (alkaline) (Depending on battery type and use pattern) |
Dimensions | 254.8 mm (10.03″) long, 50.0 mm (1.97″) diameter |
Net Weight | 280g |
Accessories Included | AT8456a Quiet-Flex™ stand clamp |
Belt Pack | |
---|---|
RF Power Output | 10 mW |
Spurious Emissions | Following federal and national regulations |
Input Connections | Four-pin Locking Connector, Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V |
Battery Type | Two 1.5V AA |
Battery Life | >7 hours (alkaline) Depending on batt. type & use pattern |
Dimensions | 70.2 mm (2.76″) W x 107.0 mm (4.21″) H x 24.9 mm (0.98″) D |
Net Weight | 100g |