TURBOSOUND NuQ152
คุณสมบัติสินค้า:
ตู้ลำโพง 15 นิ้ว 2 ทาง 2,000 วัตต์
เลือกสี
หมวดหมู่ : สินค้าระบบเสียง , ลำโพง , ลำโพง PASSIVE ,
แบรนด์ : TURBOSOUND
Share
2 Way 15″ Full Range Loudspeaker
2 way full range loudspeaker for portable PA applications
500 Watts continuous, 2,000 Watts peak power
Ideal for FOH, side fill and monitor applications
Carbon fibre loaded 15" low frequency driver with inside/outside coil
Titanium dome 1.4" neodymium motor compression driver
Rotatable converging elliptical waveguide provides 80° H x 50° V dispersion
15 mm (5/8") birch plywood enclosure with hard wearing semi matt black paint finish
Rugged powder coated perforated steel mesh grille
Integral 36 mm pole mount and handles
M10 and M8 rigging points compatible with TURBOSOUND and OmniMount* brackets
Neutrik speakON * NL4 connectors for reliable long life operation
NuQ152
The 2 way full range NuQ152 is a switchable passive/bi-amp 2,000 Watt 15" loudspeaker system ideally suited for a wide range of speech and music sound reinforcement applications. Engineered to work in conjunction with Turbosound loudspeaker management systems, the NuQ152 provides optimal performance for FOH, sidefill and delay line loudspeakers, and is an exceptional choice for wedge monitoring applications. The symmetrical trapezoidal shape and high frequency dispersion pattern also make the NuQ152 an obvious choice for mirrored left/right monitor wedge placement.
The NuQ152 loudspeaker features a carbon fibre loaded 15" low frequency driver with an inside/outside wound low mass voice coil for improved transient response, and an aluminium dome 1" neodymium high frequency compression driver mounted on a 70° horizontal by 70° vertical dispersion low distortion waveguide. All drivers are matched with an internal passive crossover network in a reflex-loaded enclosure, and bi-amp mode can be enabled by means of a rear panel switch. The rear panel connector plate carries Neutrik speakON * NL4 connectors for input and link connections to additional enclosures.
Finished in a highly durable semi matt black paint, the cabinet is constructed from 15 mm (⅝") birch plywood – and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. Multiple threaded rigging points are provided for suspension in any orientation, or for mounting with industry standard wall brackets. An optional flying yoke allows for further flexibility in install applications (available separately). The NuQ152 also features a 35 mm socket for standard pole mounting – plus integrated handles for convenient transport.
Architecture & Engineering Specifications
The speaker shall be of the full range, two-way switchable bi-amp/passive type consisting of one 15" (394 mm) LF driver and one 1" (25 mm) HF compression driver. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 50 Hz to 18 kHz and within -10 dB from 45 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 70° H x 70° V. Nominal impedance shall be HF: 6 Ohms, LF: 8 Ohms; passive: 8 Ohms. Power handling shall be HF: 40 Watts continuous, 160 Watts peak, LF: 500 Watts continuous, 2,000 Watts peak; passive: 500 Watts continuous, 2,000 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 97 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifier input, shall be HF: 128 dB, LF: 130 dB; passive: 130 dB. Dimensions: 712 mm high x 430 mm wide x 385 mm deep (28" x 16.9" x 15.2"). Net weight: 24.4 kg (53.7 lbs). The loudspeaker system shall be the Turbosound NuQ152. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equaled or exceeded.
Specification
System
| Frequency Response | 50 Hz – 18 kHz ±3 dB |
| Nominal Dispersion | 70° H x 70° V @ -6 dB points |
| Directivity Factor (Q) | 9.4 |
| Directivity Index (DI) | 9.7 |
| Power Handling (IEC) | |
| Sensitivity | 97 dB (1 W @ 1 m) |
| Maximum SPL | |
| Impedance | |
| Crossover Type | Passive / Bi-amp switchable |
| Components | 1 x 15" (394 mm) LF driver |
Enclosure
| Connectors | 2 x Neutrik speakON NL4 |
| Wiring | |
| Dimensions (H x W x D) | 712 x 430 x 385 mm (28 x 16.9 x 15.2") |
| Net Weight | 24.4 kg (53.7 lbs) |
| Construction | 15 mm (5/8") birch plywood |
| Finish | Semi matt black paint |
| Grille | Powder coated perforated steel |
| Flying Hardware | M10 x 12 points |
