TURBOSOUND TCX122-R

คุณสมบัติสินค้า:

ตู้ลำโพง 12 นิ้ว 2 ทาง 1,200 วัตต์ ทนทานต่อสภาพอากาศ กันน้ำ

แบรนด์ : TURBOSOUND

Share

TURBOSOUND DUBLIN TCX122-R

2 Way 12″ Loudspeaker for Installation Applications (Weather Resistant)

 

Features
    • Passive 2 way loudspeaker for installation applications
    • 300 Watts continuous, 1,200 Watts peak power
    • All components weather resistant to IP54 for outdoor use
    • High excursion 12″ low frequency driver with low mass voice coil for improved transient response
    • 1″ high temperature dome compression driver with extended high frequency reproduction
    • Rotatable converging elliptical waveguide provides 90° H x 60° V dispersion
    • M10, M8 and M6 rigging points compatible with TURBOSOUND and OmniMount* brackets
    • Trapezoidal cabinet shape enables visually unobtrusive loudspeaker arrays
    • 15 mm (5/8″) birch plywood enclosure with hard wearing semi matt black paint finish
    • Powder coated perforated plated steel mesh grille with foam backing
    • Captive cable tail with sealed cable gland on aluminium connector panel
    • 10-Year Warranty Program*
    • Designed and engineered in the U.K.

 


DUBLIN TCX122-R
The DUBLIN TCX122-R is a 1,200 Watt compact 12" passive two way loudspeaker that is ideally suited for a wide range of portable or installed speech and music sound reinforcement applications. TCX122-R consists of a trapezoidal enclosure housing a high excursion 12" reflex-loaded low frequency driver with low mass voice coil for improved transient response, and a 1" high temperature dome compression driver mounted on a rotatable converging elliptical waveguide, which provides a 90° horizontal by 60° vertical dispersion pattern.



Custom-Engineered Drivers
Turbosound is recognised the world over for designing and building some of the most iconic loudspeakers and subwoofers. We take meticulous care and pride in maintaining that reputation by utilising only drivers designed specifically for each application – it’s what sets us apart from the competition. TCX122-R’s high excursion 12" low frequency and 1" high temperature dome compression drivers ensure truly world-class performance that will stand the test of time.



Rotatable Waveguide
The TCX122-R’s compression driver is mated to a converging elliptical waveguide that is rotatable through 90°, allowing a swap of the horizontal and vertical dispersion patterns for a smooth wavefront, while providing exceptional pattern control. This feature is especially useful for retaining wide horizontal dispersion when the enclosure is mounted horizontally due to ceiling height restrictions.



Construction and Connectivity
Constructed from 15 mm (5⁄8") birch plywood, the cabinet is finished in hard wearing semi matt black textured paint and includes internal M10, M8 and M6 threaded rigging points for use with Turbosound wall and ceiling brackets, and industry standard loudspeaker brackets. A perforated steel mesh grille backed with reticulated foam protects the drive units. The rear panel features a sealed captive cable and gland.



Designed to Weather the Elements
When permanently installed, the TCX122-R presents a discreet appearance with no visible side handles for visually unobtrusive loudspeaker arrays. The weatherised paint, zinc plated grill with outdoor powdercoat, and weather resistant coated drivers deliver an iP54 rated package that not only provides class-leading performance, but maintains its attractive appearance for many years.

Architecture & Engineering Specifications
The loudspeaker shall be of the full range, two-way passive type consisting of one 12" (305 mm) LF driver and one 1" (25 mm) HF compression driver. The loudspeaker shall be weather resistant for outdoor use, to rating standard IP54. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 100 Hz to 18 kHz and within -10 dB from 68 Hz to 20 kHz. Nominal dispersion, at -6 dB points, shall average 90° H x 60° V, rotatable. Nominal impedance shall be 8 Ohms. Power handling shall be 300 Watts continuous, 1,200 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth,
shall be 97 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifier input, shall be 128 dB. Dimensions: 552 mm high x 406 mm wide x 368 mm deep (21.7" x 16.0" x 14.5"). Net weight: 18.3 kg (40.2 lbs). The loudspeaker system shall be the Turbosound TCX122-R. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equalled or exceeded.

Specification

System


Frequency response100 Hz 18 kHz ±3 dB

68 Hz 20 kHz -10 dB
Nominal dispersion90° H x 60° V @ -6 dB points
Power handling (IEC)300 W continuous, 1,200 W peak
Sensitivity97 dB (1 W @ 1 m)
Maximum SPL122 dB continuous, 128 dB peak
Impedance8 O
Components1 x 12 (305 mm) LF driver

1 x 1 (25 mm) HF compression driver

Enclosure


Connectors2-core captive cable tail
WiringPins 1+ / 1- input, pins 2+ / 2- link
Dimensions (H x W x D)552 x 406 x 368 mm (21.7 x 16.0 x 14.5)
Net weight18.3 kg (40.2 lbs)
Construction15 mm (5/8) birch plywood
FinishSemi matt black paint
GrillePowder coated perforated Zinc plated steel
Flying hardwareM10 x 9, M8 x 4, M6 x 4 Points

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้