ตู้ลำโพงซับวูฟเฟอร์ 15 นิ้ว 4,000 วัตต์ (Weather Resistant)
หมวดหมู่ : สินค้าระบบเสียง ,  ลำโพง ,  ลำโพงซับวูฟเฟอร์ , 
แบรนด์ : TURBOSOUND
Share
Features
DUBLIN TCX115B-R
The DUBLIN TCX115B-R is a 4,000 Watt 15" dual ported bandpass enclosure that is optimally tuned for extended low frequency response. Engineered to work in conjunction with TURBOSOUND loudspeaker management systems, the TCX115B-R provides very high output FOH performance and is ideally suited for a wide range of music and live sound reinforcement applications.
Custom-Engineered Drivers
Turbosound is recognised the world over for designing and building some of the most iconic loudspeakers and subwoofers. We take meticulous care and pride in maintaining that reputation by utilising only drivers designed specifically for each application – it’s what sets us apart from the competition.
The TCX115B-R features a powerful, double suspension 15" low frequency driver that utilises a special inside/outside wound voice coil for higher magnetic density, better heat dissipation, high power handling capacity, and improved efficiency. For its size and operating bandwidth, the TCX115B-R delivers extremely high and virtually distortion-free output for world-class low frequency performance that will stand the test of time.
Bandpass Enclosure Design
Bandpass enclosures are extremely efficient, creating maximum bass output within a specific frequency range by increasing the acoustic load presented to the driver. The low distortion bandpass design utilised in the TCX115B-R reinforces the bass musical instrument frequencies, and steep cutoff slopes ensure an effective acoustic transition for use with DUBLIN Series full-range loudspeakers. A typical application could consist of an TCX115B-R providing the low-frequency bass extension for one, or two DUBLIN Series top cabinets.
Construction and Connectivity
Constructed from 15 mm (5⁄8") birch plywood, the cabinet is finished in hard wearing semi matt black textured paint and includes internal M10 threaded rigging points for use in permanent installation. The rear panel features a sealed captive cable and gland for added protection from the elements.
Designed to Weather the Elements
When permanently installed, the TCX115B-R presents a discreet appearance with no visible side handles for visually unobtrusive loudspeaker arrays. The weatherised paint, zinc plated grill with outdoor powdercoat, and weather resistant coated drivers deliver an iP54 rated package that not only provides class-leading performance, but maintains its attractive appearance for many years.
Architecture & Engineering Specifications
The loudspeaker shall be of the passive subwoofer type consisting of one 15" (380 mm) LF driver. The loudspeaker shall be weather resistant for outdoor use, to rating standard IP54. Performance specifications of a typical production unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be flat within ±3 dB from 35 Hz to 125 Hz and within -10 dB from 28 Hz to 170 Hz. Nominal dispersion, at -6 dB points, shall be Half Space. Nominal impedance shall be 8 Ohms. Power handling shall be 1,000 Watts continuous, 4,000 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 95 dB, 1 Watt @ 1 metre. Maximum SPL (peak), measured at 1 metre with music program at stated amplifier input, shall be 131 dB. Dimensions: 600 mm high x 499 mm wide x 600 mm deep (23.6" x 19.6" x 23.6"). Net weight: 36.7 kg (80.7 lbs). The loudspeaker system shall be the TURBOSOUND TCX115B-R. No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory verifies that the above combined performance / size specifications are equalled or exceeded.
Frequency response | 35 Hz 125 Hz ±3 dB 28 Hz 170 Hz -10 dB |
Nominal dispersion | Half space |
Power handling (IEC) | 1,000 W continuous, 4,000 W peak |
Sensitivity | 95 dB (1 W @ 1 m) |
Maximum SPL | 125 dB continuous, 131 dB peak |
Impedance | 8 O |
Components | 1 x 15 (380 mm) LF driver |
Connectors | 2-core captive cable tail |
Wiring Pins | 1+ / 1- input, pins 2+ / 2- link |
Dimensions (H x W x D) | 600 x 499 x 600 mm (23.6 x 19.6 x 23.6) |
Net weight | 36.7 kg (80.7 lbs) |
Construction | 15 mm (5/8) birch plywood |
Finish | Semi matt black paint |
Grille | Powder coated perforated Zinc plated steel |
Flying hardware | M10 x 8 Points |