TASCAM SB16D
16-IN/16-OUT DANTE STAGE BOX
16-in/16-out Dante analog converter with built-in 32-bit ADC & Class 1 HDIA mic preamps. Controllable with TASCAM IO Control app or with TASCAM Sonicview series.
Features at a Glance
- 16 in/16 out Dante enabled stage box with redundancy
- 16 XLR mic/line inputs with +48 phantom power and SIG OL LED input signal/overload indicators
- 16 XLR line outputs with SIG OL LED output signal indicators
- Up to 96 kHz sampling and 32-bit precision
- Supports both floor installation and 3U rack mounting
- Fully controllable from connected TASCAM Sonicview mixers
- Remote control and offline editing using TASCAM IO Control app for macOS, Windows, and iPadOS
Other Features
- Equipped with DC input and supports redundant power supply (DC power supply not included)
- Equipped with 8 in/8 out expansion GPIO terminals, expandable to 16 in/16 out when connected to a TASCAM Sonicview mixer
- Switchable reference level
- Equipped with etherCON compatible connectors as Dante connection
- Dante Domain Manager support
- AES67 interoperability
- SMPTE ST 2110 interoperability
Spec description
| Analog Audio Inputs and Outputs | |
| MIC/LINE INPUTS (1-16) | |
| CONNECTOR | XLR-3-31 type (1: GND, 2: HOT, 3: COLD) |
| Input Impedance | 5.0kΩ and more |
| Max Input Level | +32dBu (TRIM Min, PAD: ON), +12dBu (TRIM Min, PAD: OFF) |
| Min Input Level | -42dBu (TRIM Max, PAD: ON), -62dBu (TRIM Max, PAD: OFF) |
| Phantom Power | +48V available |
| LINE OUTPUTS (1-16) | |
| CONNECTOR | XLR-3-32 type (1: GND, 2: HOT, 3: COLD) |
| Nominal Output Level | +6dBu (D.ref: -9dB)
+4dBu (D.ref: -14dB, -16dB)
+4dBu or 0dBu (D.ref: -18dB, -20dB) |
| Max Output Level | +15dBu(D.ref.: -9dBFS, A.ref: +6dBu)
+18dBu(D.ref.: -14dBFS, A.ref: +4dBu)
+20dBu(D.ref.: -16dBFS, A.ref: +4dBu)
+18dBu(D.ref.: -18dBFS, A.ref: 0dBu)
+20dBu(D.ref.: -20dBFS, A.ref: 0dBu)
+22dBu(D.ref.: -18dBFS, A.ref: +4dBu)
+24dBu(D.ref.: -20dBFS, A.ref: +4dBu)
*D.ref.: Digital Reference Level, A.ref.: Analog Reference Level
*0dBu=0.775Vrms |
| Output Impedance | 100Ω or less |
| Digital Audio Inputs and Outputs | |
| Dante(PRIMARY/SECONDARY) | |
| CONNECTOR | etherCON Cat5e compatible |
| Number of channels | 64 channels (48 kHz), 32 channels (96 kHz) |
| Ethernet | 1000BASE T(IEEE802.3ab) |
| Cable | CAT5e STP |
| | Supports redundant mode and Switched mode |
| Other Inputs and Outputs | |
| GPIO | |
| CONNECTOR | D-sub 25pin (8in/8out, female, inch) |
| Input circuit | pull up (5V) |
| Output circuit | Open corrector |
| Output impedance | 10Ω |
| Withstand Voltage | 20V |
| Maximum current | 35mA |
| +5V Maximum supply current | 50mA |
| General | |
| Dimensions | 454(W) x 140 (H) x 179.6 (D) mm (The original foot is attached)
482.8(W) x 132(H) x 120(D) mm (Rackmount angle is attached)
17.88(W) x 5.52(H) x 7.08(D) inch (The original foot is attached)
19.01(W) x 5.20(H) x 4.72(D) inch (Rackmount angle is attached) |
| Weight | 4.5kg / 9.93 lb |
| AC Power Supply | AC100V 240V 50/60 Hz |
| DC Power Supply | DC11V/4A - 27V/2A |
| Power Consumption | 44W |
| Operating Temperatures | 0 - 40 |
| Control Software | TASCAM IO CONTROL |
| Supported Operating System | |
| Windows | Windows 11 64 bit, Windows 10 64 bit |
| Mac | macOS Monterey(12), macOS Big Sur(11), macOS Catalina(10.15) |
| iOS | iPadOS 15, iPadOS 14 |
| Included Items | SB 16D x1
Power Code (JAPAN USA/EUROPE/OCEANIA) x1
Rackmount angle (screw) set x1
Rackmount angle screw kit x1
TASCAM ID registration guide x1
Owner's manual with warranty x1 |
Audio Performance
| MIC PRE AMP EIN (Equivalent Input Noise) | -128dBu or less |
| Distortion | 0.002% and less (MIC/LINE > Dante, +4dBu Inputs, PAD=OFF, TRIM MIN, JEITA)
0.002% and less (DANTE > LINE OUTPUT, 0dBFS Outputs, JEITA) |
| Frequency characteristic | |
| 20Hz - 20kHz | +0dB、-0.5dB(48kHz) (MIC/LINE > LINE OUTPUT, JEITA) |
| 20Hz - 40kHz | +0dB、-1.0dB(96kHz) (MIC/LINE > LINE OUTPUT, JEITA) |
| 20Hz - 20kHz | +0dB、-0.5dB(48kHz) (DANTE IN > LINE OUTPUT, JEITA) |
| 20Hz - 40kHz | +0dB、-1.0dB(96kHz) (DANTE IN > LINE OUTPUT, JEITA) |
| Crosstalk | 100dB or more (MIC/LINE > OUTPUT, 1kHz Sine wave, JEITA) |
| Dynamic range | 110dB or more (MIC/LINE > DANTE, PAD=OFF, TRIM MIN, D. 20dBFS, JEITA)
111dB or more (DANTE IN > LINE OUTPUT, Sampling rate: 48kHz)
112dB or more (DANTE IN > LINE OUTPUT, Sampling rate: 96kHz) |
*0dBu=0.775Vrms
*D.ref: Digital Reference Level
*Specifications and appearance are subject to change without notice for improvement.
