TASCAM SB16D
16-IN/16-OUT DANTE STAGE BOX
16-in/16-out Dante analog converter with built-in 32-bit ADC & Class 1 HDIA mic preamps. Controllable with TASCAM IO Control app or with TASCAM Sonicview series.
Features at a Glance
- 16 in/16 out Dante enabled stage box with redundancy
- 16 XLR mic/line inputs with +48 phantom power and SIG OL LED input signal/overload indicators
- 16 XLR line outputs with SIG OL LED output signal indicators
- Up to 96 kHz sampling and 32-bit precision
- Supports both floor installation and 3U rack mounting
- Fully controllable from connected TASCAM Sonicview mixers
- Remote control and offline editing using TASCAM IO Control app for macOS, Windows, and iPadOS
Other Features
- Equipped with DC input and supports redundant power supply (DC power supply not included)
- Equipped with 8 in/8 out expansion GPIO terminals, expandable to 16 in/16 out when connected to a TASCAM Sonicview mixer
- Switchable reference level
- Equipped with etherCON compatible connectors as Dante connection
- Dante Domain Manager support
- AES67 interoperability
- SMPTE ST 2110 interoperability
Spec description
Analog Audio Inputs and Outputs | |
MIC/LINE INPUTS (1-16) | |
CONNECTOR | XLR-3-31 type (1: GND, 2: HOT, 3: COLD) |
Input Impedance | 5.0kΩ and more |
Max Input Level | +32dBu (TRIM Min, PAD: ON), +12dBu (TRIM Min, PAD: OFF) |
Min Input Level | -42dBu (TRIM Max, PAD: ON), -62dBu (TRIM Max, PAD: OFF) |
Phantom Power | +48V available |
LINE OUTPUTS (1-16) | |
CONNECTOR | XLR-3-32 type (1: GND, 2: HOT, 3: COLD) |
Nominal Output Level | +6dBu (D.ref: -9dB) +4dBu (D.ref: -14dB, -16dB) +4dBu or 0dBu (D.ref: -18dB, -20dB) |
Max Output Level | +15dBu(D.ref.: -9dBFS, A.ref: +6dBu) +18dBu(D.ref.: -14dBFS, A.ref: +4dBu) +20dBu(D.ref.: -16dBFS, A.ref: +4dBu) +18dBu(D.ref.: -18dBFS, A.ref: 0dBu) +20dBu(D.ref.: -20dBFS, A.ref: 0dBu) +22dBu(D.ref.: -18dBFS, A.ref: +4dBu) +24dBu(D.ref.: -20dBFS, A.ref: +4dBu) *D.ref.: Digital Reference Level, A.ref.: Analog Reference Level *0dBu=0.775Vrms |
Output Impedance | 100Ω or less |
Digital Audio Inputs and Outputs | |
Dante(PRIMARY/SECONDARY) | |
CONNECTOR | etherCON Cat5e compatible |
Number of channels | 64 channels (48 kHz), 32 channels (96 kHz) |
Ethernet | 1000BASE T(IEEE802.3ab) |
Cable | CAT5e STP |
| Supports redundant mode and Switched mode |
Other Inputs and Outputs | |
GPIO | |
CONNECTOR | D-sub 25pin (8in/8out, female, inch) |
Input circuit | pull up (5V) |
Output circuit | Open corrector |
Output impedance | 10Ω |
Withstand Voltage | 20V |
Maximum current | 35mA |
+5V Maximum supply current | 50mA |
General | |
Dimensions | 454(W) x 140 (H) x 179.6 (D) mm (The original foot is attached) 482.8(W) x 132(H) x 120(D) mm (Rackmount angle is attached) 17.88(W) x 5.52(H) x 7.08(D) inch (The original foot is attached) 19.01(W) x 5.20(H) x 4.72(D) inch (Rackmount angle is attached) |
Weight | 4.5kg / 9.93 lb |
AC Power Supply | AC100V 240V 50/60 Hz |
DC Power Supply | DC11V/4A - 27V/2A |
Power Consumption | 44W |
Operating Temperatures | 0 - 40 |
Control Software | TASCAM IO CONTROL |
Supported Operating System | |
Windows | Windows 11 64 bit, Windows 10 64 bit |
Mac | macOS Monterey(12), macOS Big Sur(11), macOS Catalina(10.15) |
iOS | iPadOS 15, iPadOS 14 |
Included Items | SB 16D x1 Power Code (JAPAN USA/EUROPE/OCEANIA) x1 Rackmount angle (screw) set x1 Rackmount angle screw kit x1 TASCAM ID registration guide x1 Owner's manual with warranty x1 |
Audio Performance
MIC PRE AMP EIN (Equivalent Input Noise) | -128dBu or less |
Distortion | 0.002% and less (MIC/LINE > Dante, +4dBu Inputs, PAD=OFF, TRIM MIN, JEITA) 0.002% and less (DANTE > LINE OUTPUT, 0dBFS Outputs, JEITA) |
Frequency characteristic | |
20Hz - 20kHz | +0dB、-0.5dB(48kHz) (MIC/LINE > LINE OUTPUT, JEITA) |
20Hz - 40kHz | +0dB、-1.0dB(96kHz) (MIC/LINE > LINE OUTPUT, JEITA) |
20Hz - 20kHz | +0dB、-0.5dB(48kHz) (DANTE IN > LINE OUTPUT, JEITA) |
20Hz - 40kHz | +0dB、-1.0dB(96kHz) (DANTE IN > LINE OUTPUT, JEITA) |
Crosstalk | 100dB or more (MIC/LINE > OUTPUT, 1kHz Sine wave, JEITA) |
Dynamic range | 110dB or more (MIC/LINE > DANTE, PAD=OFF, TRIM MIN, D. 20dBFS, JEITA) 111dB or more (DANTE IN > LINE OUTPUT, Sampling rate: 48kHz) 112dB or more (DANTE IN > LINE OUTPUT, Sampling rate: 96kHz) |
*0dBu=0.775Vrms
*D.ref: Digital Reference Level
*Specifications and appearance are subject to change without notice for improvement.