Australian Monitor ES250

คุณสมบัติสินค้า:

250W Mixer Amplifier Cost Effective, Basic Features

แบรนด์ : Australian Monitor

Share

Australian Monitor ES250

The Australian Monitor ES Series is the latest evolution of our Essentials series of Mixer Amplifiers, now featuring 2 channels of priority VOX muting, integrated tone generator (120/250 models) and a modern look and finish.

The ES mixer amplifiers maintain the core features you expect including four XLR mic/dual RCA line inputs, record and line outputs, low impedance or constant voltage outputs and 12V phantom power.

The ES series offers the latest features to meet projects requiring the most cost-effective solutions.

Features

  • 250 Watt mixer amplifier

  • 4 XLR microphone/dual RCA line inputs

  • 100 volt or 4 ohm output

  • Line and Record Level Outputs

  • Input 1,2 vox muting priority

  • Integrated tone generator. Evac/Alert/Intruder/Bell/Chime tones

  • 12VDC phantom power

  • 2 RU rack mountable chassis


Power Amplifier Stage

 
The ES mixer amplifiers all offer 100V and 4 output options so you can choose the required output for your speaker application.

4 Input Channels

 
The ESMIX and Mixer Amplifiers all feature four inputs channels.
Each channel can be used as a Microphone input(XLR) or as a Line Level Input(RCA).

Line and Record Outputs

 
The ESMIX and ES Mixer Amplifiers feature both a Line and Record Output.
These outputs can be used to link additional power amplifiers to increase the required output channels or total power requirements.

Priority Muting & Phantom Power

The ES series offer two channels of priority muting control.
Using selectable DIP switches on the rear of the product, different configuration modes can be selected as shown in the table.
Use the priority muting to perform talk over functions which mute background music inputs when audio is detected on a priority input channel.

Phantom power is also provided which, when activated, provides 12 volts to condenser microphones on the XLR inputs.
 

Embedded Tone Generator

The ES120, ES250 and ESMIX products embed a tone generator which can play 5 internal tones.
A rear panel connector allows the tones to be played by connecting any of the pins to the ground terminal.
A tone volume control is also provided to change the tone to the desired level.

When a tone is playing Channels 2, 3 and 4 are muted. Channel 1 is not muted to allow, if required, microphone messaging over the tone.
 

Specifications

Output Power per Channel250WFrequency Response40Hz - 20kHz
Output Mode4 Ohm-100VTHD+N< 0.3%
Input Channels4 MIC or LineSignal to Noise Ratio> 80dB
Input Voltage230Vac 50HzInput SensitivityMIC: 1.2mV - Line: 160mV
Mounting2RUCoolingFan-assisted
  Warranty5 years
Product Dimensions
(W x D x H)
483mm x 365mm x 88mmShipping Dimensions
(W x D x H)
545mm x 460mm x 160mm
Net Weight11.8 KgShipping Weight12.7 Kg
  GTIN EAN9323383020061

   Brochure

   Manual

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้