4-channel DSP Installation Amplifier 4 x 120 W @ 4 Ohm / 70V/100V
หมวดหมู่ : สินค้าระบบเสียง ,  เครื่องขยายเสียง , 
แบรนด์ : LD Systems
Share
Good sound belongs everywhere - in the hotel lobby, in conference rooms, in schools and houses of worship. Demands are constantly increasing, not only in terms of quality, but also in terms of flexibility. Permanently installed and still flexible? This apparent contradiction can be resolved by the IPA Series DSP-based installation amplifiers.
The IPA 412 T is a professional, four-channel installation power amplifier with 4 x 120 watts. While the 70V/100V outputs are equipped with high quality toroidal core transformers, the low impedance 4-Ohm outputs are completely transformerless and guarantee the highest possible audio quality. The versatile DSP functions include, amongst others, a parametric EQ with matching speaker library, dynamic tools, a matrix mixer, priority source selection and delay.
Despite this range of functions, the IPA Series power amps are easy to operate. Important functions such as signal, limit, protection and bridge mode are easily visible via the LEDs on the front panel.
HPF/LPF presets can be enabled directly on the device via DIP switches The IPA 412 T is already equipped for remote control using future remote panels and paging microphones from LD Systems. The back-panel slot provides expansion card connectivity for additional future-proofing. The Ethernet card offers comprehensive configuration and management via software. The Ethernet+Dante card also offers Dante audio networking capabilities and connection to a wide range of Dante-enabled devices, in order to integrate the IPA 412 T into the Dante network and resolve more complex tasks.
Times are changing; rooms are redivided or rededicated, numbers of attendees increase or decrease based on unforeseen events, but with the IPA Series DSP-supported power amps, your installation is prepared for any situation. Scalability and future-proofing are the biggest advantages of the IPA Series. Its energy efficiency is also ideal thanks to the class-D technology and switchable auto standby.
IPA 412 T4-channel DSP Installation Amplifier 4 x 120 W @ 4 Ohm / 70V/100V
Professional 4-channel installation amplifier
Powerful class-D power amplifier with 4 x 120 W (IPA 412 T) or 4 x 240 W (IPA 424 T) at 4 Ohm (transformer bypass) or 70V/100V outputs through toroidal core transformer
Stereo/parallel/bridge mode selector switch per channel pair
4 balanced line inputs and 4 speaker outputs with terminal block connections
User-friendly front panel with signal, limit, protection, mute and bridge mode LEDs per channel and clipping LEDs for the inputs
Speaker protection circuits: DSP limiter, overcurrent, direct current, overheating, short circuit as well as switchable auto standby mode
DSP presets with HPF and LPF which can be activated via DIP switches
REMOTE audio and control bus based on CAN architecture (Controller Area Network)
Equipped for future LD Systems remote control panels and paging microphones
Slot for future optional expansion cards for Ethernet or Ethernet + Dante
Optional accessories: 19" L-bearing rails, length 450 mm
*เช็ค Stock และราคากับเจ้าหน้าที่ก่อนสั่งซื้อทุกครั้ง
Specifications
Product type | Amplifier |
Type | Installation power amplifier |
Audio Channels | 4 |
Output Circuitry | Class D |
Operating voltage | Wide Range SMPS with PFC (power factor control) |
Mains connector | IEC socket |
Auto-Standby Power | Yes. Switchable (On-Off) |
Time to Auto-standby | 20 Min with no audio input signal |
DSP | Yes |
Remote-Bus | Yes |
Indicators | Front Panel: "PROT", "LIMIT", "SIG", "BRIDGE" and Mute Symbol LED´s. Power On/ Standby LED, Rear Panel: 4x Input Clip LED´s, Remote Lock LED (Red) |
Controls Front panel | On / off switch, standby |
Controls Element Back Panel | "BRG (Bridge), "PAR (Parallel), "ST (Stereo), Amplifier Channel Mode, Low-Z and High-Z switches (paired), Output Volume potentiometers, Preset A and B switches, Remote Lock, Remote ON/OFF, Remote-Mode, Standby On/Off |
Inputs | 4x Balanced Line Inputs, Remote Bus Audio Input |
Input connectors | 6-pin Terminal Block Pitch 3.81mm, Remote IN/OUT RJ45, Service Micro USB Type-B |
Expansion Slot | For optional Ethernet, or Ethernet + Dante cards |
Cooling | front to rear/side airflow, Passive + 2-zone temperature controlled active cooling |
Operating voltage | 100 V AC - 240 V AC, 50 - 60 Hz |
Fuse | T10AL 250 V |
Inrush Current Power OFF-Standby | 2.8 A |
Inrush Current Standby-ON | 0.5 A |
Power Consumption @ Standby | 0.9 W |
Power Consumption @ idle mode | 25 W |
Power Consumption @ full load | 790 W |
Operating temperature | 0 °C - 40 °C; (max 60% relative humidity) |
Width | 483 mm |
Height | 44.5 mm |
Depth | 425 mm |
Weight | 8,7 kg |
Rated ouput power (1kHz @ 4 Ohms) | 4 x 120 W (1,5 Seconds Sine Burst) |
Rated ouput power (1kHz @ 8 Ohms) | 4 x 60 W (1.5 Seconds Sine Burst) |
Rated ouput power (1kHz @ 16 Ohms) | 4 x 30 W (1,5 Seconds Sine Burst) |
Rated ouput power (1kHz @ 8 Ohms, bridged) | 2 x 235W (1,5 Seconds Sine Burst) |
4 x 240W, Transformer Coupled Output | 4 x 120W, Transformer Coupled Output |
Protection circuits | Audio Limiter, DC, HF Protect, HPF (High-Z), short circuit, temperature, thermal overload |
Minimum load impedance per channel | 4 ohms Single-Ended, 8 ohms Bridge |
Nominal input sensitivity | +5 dBu (Sine 1 kHz, Gain max) |
Nominal input clipping | 19 dBu (Sine 1kHz) |
THD + N | < 0,03 % (Low-Z SPK OUT, +18 dBu, 20 Hz 20 kHz) |
Frequency response | 18 Hz 22 kHz (Low-Z OUT, -3 dB), 50 Hz 23 kHz (High-Z OUT, -3 dB) |
Signal-to-noise ratio | >105 dB (Low-Z SPK OUT, CH Gain Center (0 dB), 20 kHz BW, a-weighted) |
Crosstalk | 83 dB @ 1 kHz |
System Latency: | 6.2 ms |
AD/DA converter resolution | 24 bit |
AD/DA converter sampling rate | 48 kHz |